616-Dual FMC signal processing board based on 6U VPX XCVU13P+XC7Z020

Item No.: 616
 The board is based on the 6U VPX standard structure and includes an XCVU13P high-performance FPGA, an XC7Z020 management interface FPGA, dual-channel HPC FMC to expand high-speed AD, DA, optical fiber interfaces, etc. It is an ideal board for high-perfor
Description

 
一、PCBA overview 
   The board is based on the 6U VPX standard structure and includes an XCVU13P high-performance FPGA, an XC7Z020 management interface FPGA, dual-channel HPC FMC to expand high-speed AD, DA, optical fiber interfaces, etc. It is an ideal board for high-performance digital computing and optical fiber acceleration.
 
 
二、PCBA technical indicators 
 ●  The main FPGA processor uses Xilinx VirtexUltralSCALE+ series chip XCVU13P; 
 ●  Main FPGA plug-in 2 sets of DDR4, each set is 2GB, 64bit capacity;
 ●  The main FPGA has 2 sets of external FMC HPC connectors, supporting LA, HA, HB, and 8 GTY interfaces; 
 ●  The main FPGA leads to 1 QSPF28, and the data rate supports 25GbpsX4;
 ●  The main FPGA and VPX backplane are interconnected with 32 GTYs and 32 pairs of LVDS;
 ●  16 pairs of LVDS are interconnected between the master FPGA and the slave FPGAXC7Z020;
 ●  Connect 32 pairs of LVDS or 64 LVTTL level IOs from the FPGA to the VPX backplane;
 ●  Connect 1 channel Gigabit Ethernet, 4 channels RS232, and 2 channels Can from FPGA to VPX backplane;
 ●  Externally plug DDR, QFlash, EMMC, and SD card from the PS side of the FPGA board;
 ●  1 Gigabit Ethernet, 2 RS232, and 1 HDMI interfaces are output from the FPGA front panel;
 ●  The JTAG debugging ports of the two FPGAs are led out through the J30J connector;
 ●  Hardware connection loads BPI mode from FPGA to main FPGA.
三、software  
 ● Provide interface test programs for the main FPGA, including DDR4, optical fiber, RapidIO, FMC and other interfaces;
 ● Provide bare-running interface test programs from FPGA, including DDR3, RS232, and Gigabit network interfaces. (Linux operating system can be supported, but technical support is not provided)
四、Physical properties:
Size: 6U VPX board, size 160X233.35mm.
Working temperature: 0 +55, supports industrial grade -40 +85
Working humidity: 10% ~ 80%
五、Power supply requirements:
DC power supply. The power consumption of the entire board is 100W.
Voltage: +12V 10A.
Ripple: ≤10%
Application areas:
Software radio system, baseband signal processing, wireless simulation platform, high-speed image acquisition and processing, etc.